Cars are very delicate pieces of machinery. They require a lot of attention and care. Sometimes we get the alert to change oil and the annoying light keeps flashing at us to give constant, annoying reminders. The only sensible way to get rid of these light flashes is by getting the oil changed. But, sometimes even if you get the oil changed the light keeps flashing stubbornly.

This can be very annoying and irritating. If you have changed your oil and the light is still there, then it best for you to do switch it off yourself.

The only way to do that is by manually resetting the light. If you want to go back to driving your car peacefully without any annoying, unnecessary reminders then you need to know how to manually do it.

Steps On How To Reset Oil Change Light

The steps on how to reset the oil change light option might vary from one car to another. You might want to take a look at your user manual to get a better understanding of this guide doesn’t work out for you. Moving on, a lot of car models have the same system so you can try this option.

Basic Method

The commonly used method for all car types is this one. Firstly, start y taking your key and inserting it in the keyhole. Once its there, twist it all the way to the right. Once you do that, you will see it shift into the accessory position. Now, let it stay in that mode. The next step is where you use your feet. You will have to push the gas pedal thrice. Just simply push on the gas pedal three times without doing anything to the steering or the keys. As soon as you are done with that, go back to your key and turn it back into its original position.

Start the car as soon as you are done with the above three basic steps and you will be done. In a lot of GM models, you can easily get rid of the annoying oil change light by following the above-mentioned steps. If this doesn’t work for you then look up your car model and the steps for it in the list below.

Method # 2

Another very easy method is this one. It is very similar to the one above, but you will have to get out of the car to do it. Start by outing your key in the ignition and twist it till the car is on accessory. Moving on, get out of the car and open up your hood. Now, disconnect the negative terminal from the car battery and tap it three times. Once you have tapped it three times to the terminal, connect it again. As soon as it is connected, go back to the driver seat and start up your car.

Method # 3

Next up is another easy and convenient trick to shut that light off. The best thing about this step is that you won’t even need to put the key in the ignition. Start by opening up the hood of your car. Secondly, locate the negative terminal of your car battery. Similar to the previous steps, disconnect the negative terminal of the battery. Now let the hood remain open and go back.

Go to the driver seat and press on the horn for around 15 to 20 seconds. When you’re done, get out of the car and go back to the hood. There, you will spot the negative terminal you disconnected. Connect it back again. Now go back behind the wheel one last time. Startup your car and you will notice that the oil change light will be off.

Method # 4

For this method, you will need a cable as well. Open up the hood of your car and disconnect the positive and the negative terminal. Once both of them are disconnected, take a cable, and tie both the cables with each other. You have to be a little patient while doing this method. Let them stay connected to each other for about 15 minutes. Once the 15 minutes are over, connect them again. Connect the negative and positive terminal back to their places and close your hood.

Go back behind the wheel and start up your car. You will see that there will be no oil change light flashing at you. This is a very easy and basic method to get rid of that annoying light even after you’ve changed the oil.

Always make sure that you are wearing protective gloves when you are handling the terminals. Do the steps away from children in a safe and secluded environment. It is very important to take precautionary measures.

Why does my car says change oil after I changed it?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

What is an oil life reset?

Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.

How long will 15% oil life last?

The 15% is an average of total miles recommended. Depends on how you use your car and how much is city driving, etc. Assuming 7,500 intervals, you have a theoretical range of around 1000 miles before due. The vehicle will not self destruct at 0% oil life.

Why won’t my change oil light go off?

To reset the oil change reminder light on your vehicle: Turn the ignition key to the run position, do not start the vehicle. Press the gas pedal fully 3 times within 10 seconds. Turn the ignition to the off position. If the oil change reminder comes back, repeat the steps.

Why is my oil light on but my oil is full?

Probably your oil level is too low or much too high, or the sensor is hosed up. The oil light works off of oil pressure (generally). This is typically the oil supply pressure, but sometimes the pressure somewhere else in the engine’s oil distribution system.

Why is my maintenance required light still on after oil change?

What ‘MAINT REQD‘ Means. The ‘MAINT REQDlight comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

Why is my oil light on but I have oil?

When the oil light on your dashboard comes on, it might mean your vehicle has low oil pressure. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.

How can you tell if your oil pump is going out?

A look at the three main signs that you need to fix or change your oil pump: low oil pressure, high engine temperature, and noise.

Common Oil Pump Failure Symptoms

  • Low oil pressure. A bad oil pump will lose the ability to properly pump oil through your system.
  • Increased engine operating temperature.
  • Noise.

What are signs of oil pump going out?

There are many symptoms to look for when the oil pump goes bad. Some of the common symptoms are: noise from the valve train, strange noises from the hydraulic lifters, reduced oil pressure, a hotter engine, and a noisy oil pump. Usually, the oil pump doesn’t get servicing until it actually starts to fail.

Can a clogged oil filter cause oil light to come on?

1) Engine Overheating

Like your air filter or fuel filter, your oil filter can clog up if left in there too long. If this heat cannot be adequately dissipated by the oil and cooling system, it could lead to the engine overheating. You will often see the “Check Engine” light come on when this happens.

What does red oil light mean?

The red oil light on your dashboard indicates that there’s a problem with your engine oil, which is an urgent concern. If you’re driving and a light that looks like an old-fashioned oil can* illuminates, you should stop the car as soon as you have a safe place to pull over.

What happens if you change the oil but not the filter?

If you‘re not changing your oil filter, unfiltered oil will start flowing toward your engine, full of dirt and particulates. In the long run, this might make your engine rupture or fault. Replacing oil filters are much cheaper than replacing a broken engine, after all.

Can clogged oil filter cause low oil pressure?

The wrong filter, a filter that isn’t working properly, or a filter that gets clogged can cause oil pressure to drop. The engine can dry out and, without the oil to help displace the heat, it can overheat your vehicle. Without reducing friction, engine parts wear out and strain the cooling system.

Can an oil filter get clogged?

Are You Worried That Your Oil Filter May Be Clogged? Oil filters should last until the next oil change. Yet, it’s common for a cheap oil filter to clog up before the next oil change is due. If the filter does get clogged, its bypass valve will open, allowing dirty oil to circulate through the engine.

Does oil filter affect performance?

When one of your filters gets clogged, it can cause problems and affect performance. You may notice a loss of power, dirty smoke, oil light or even engine failure.

How do you unblock an oil passage?

Is flushing your engine good?

A good engine flush can help loosen deposits and dissolve sludge, returning your engine to like-new condition. However, in old engines with high miles, sludge may be the only barrier keeping oil from seeping through worn or cracked seals. Removing the sludge exposes the seals for what they really are – junk.

How do you unclog a oil pickup tube?

Kerosine works great, if soaked overnight. Then you’ll need something like a rifle bore brush to go in and clean everything, flexible preferably. Actually what I did was fill up a big glass jar with engine degreaser then let the pickup tube sit in there overnight.