How do I fix my F5 on Maytag washer?

Try resetting the washer by unplugging it for 10 minutes. This may clear the code and end the problem, especially if you got all the obstructions out of the lid lock mechanism. You can also press and hold the end of cycle button for 20 seconds and that should reset the washer and clear the codes.

How do you clear the error code on a Maytag washer?

How do I clear the error code on my Maytag washer? To clear the error code on your washing machine, you have to press the pause/ cancel button twice and the power button once. If still, code is displayed, unplug the machine for a minute.

What does F5 and E3 mean on a Maytag washing machine?

The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. … Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

How do I fix F5 E1 error on Maytag washer?

F5 E1 Error Code
  1. Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
  2. Power unit up by reconnecting power.
  3. Restart a new cycle.
  4. Monitor the washer for one (1) minute to ensure the error code does not display again.

How do I fix F5 error on washing machine?

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.

How do I fix the F5 on my Whirlpool washer?

Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

How do you reset the F5 code on a Whirlpool washer?

When using hot water in a Whirlpool washer, you may encounter the “F5” error code on the appliance. To finish the laundry load, reset the washer, wash in cold water and then fix the error to use hot water again.

What is F5 error code?

An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.

Why is my washer blinking F5?

If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, or the heating element circuit has failed, the “F/05” error code will be displayed.

How do you reset the code on a F5 E3 Maytag washer?

F5 E3 Error Code
  1. Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
  2. Power unit up by reconnecting power.
  3. Restart a new cycle.
  4. Monitor the washer for one (1) minute to ensure the error code does not display again.

What does e1 F5 mean on a Whirlpool washer?

The Whirlpool washer F5E1 error code is a door switch error. When the door switch is open while the door is locked for longer than 5 seconds the main control will shut the machine off and report this error. … Check for loose connections on the wiring from the door lock switch assembly to the ACU ( main control board).

How do I fix the F5 on my Kenmore washer?

The only way to clear the codes is to unplug and let sit, and then plug back in. Then it is good to go again. Various comments online indicate correlation to Water Temperature Sensor or Water Heating element.

What does FS mean on a washer?

The ‘FS’ error code indicates a freezer sensor error. This error will require service.

What does F5 E1 mean?

Door Lock Issue

The F5E1 Error Code indicates that there may be an issue with the door switch/door lock. The door is unlocked during a cycle when it should be locked. Try resetting the washer/dryer by unplugging it from the outlet for at least 1 minute, and then plugging it back in.

What does F5 mean on Whirlpool?

The F5 on most Whirlpool ranges will indicate that you have a problem with the oven door latch assembly or the oven door switch. Since you are seeing this error code when you are trying to set the self cleaning mode, this is likely the problem with your range. You could have a problem with the door switch.

How do I turn off the control lock on my Whirlpool washer?

Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.

What does E1 F5 mean on Whirlpool?

The “E1 F5” error code is a door switch malfunction. This may display if the door is not shut properly, if it is jammed or if the spring-loaded mechanism has broken.

How do I fix F5 error on Whirlpool oven?

All F5-E Codes – Door Switch Defect – This occurs when the door switches do not match. If door is latched, disconnect power from unit and check wires and connections. If damage is found, replace appropriate part. If connections are not damaged, reconnect power and hold down any key until the F5 error clears.

What does E1 F5 mean on a Whirlpool self cleaning oven?

The error code E1-F5 indicates a door latch switch failure or a door lock motor/solenoid failure. A technician will be required to make these checks. If the door latched: Disconnect power to the range. Check the wires and connections from the control to the door switch, then from the door switch to the control.

What does E1 F5 mean on Kenmore oven?

The F5/E1 fault code indicates the door locking mechanism is not working. When starting a self cleaning cycle; the door lock motor must operate and lock the door or F5/E1 will display.