What does Le mean on Daewoo washing machine?

Daewoo Washing Machine Error Fault Code = LE

Fault Detected: Washing Machine Door Open. Washer Has Detected: Washing machine detected door as open or not locked.

How do I fix the LE on my washing machine?

To reset the washer, unplug it and press the Start/Pause button for five seconds before plugging it back in. The LE code can indicate that the washer has been overloaded; large loads and bulky items can strain the motor. Remove a few items from the washer to reduce the load size and restart the cycle.

How do you reset a Daewoo washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

What is the reason for error in washing machine?

Common appliance codes could be related to a problem with the door, a water heating sensor, a software or circuit board fault, a motor or pump fault plus much more. Simple things that could have an error code could be the door being left ajar on the machine or the detergent drawer not in situ properly.

What is Le error in Samsung washing machine?

When the Samsung washer detects a low water level during the cycle, it will give you an LE error code. This prevents the washer from functioning and the machine will not move into the spin cycle. Samsung washers have a specialized water-level sensor in the pallet that prevents the washer from overflowing.

What does Le mean on my LG dishwasher?

The LE error code on the LG dishwasher display is an indication of a MOTOR ERROR. The 5 issues that may cause this fault code is a wiring problem (most common reason for LE error), the impeller of washing pump is locked, the rotor of washing motor is locked, the blade is locked, or the PCB main control board is faulty.

What does 3H mean on washer?

2H – 100-180 minutes left before the end of washing; 3H – 180-240 minutes left before the end of washing; 4H – the program requires no less than 240 minutes.

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

How do you fix a washing machine that won’t drain?

What to Do When Your Washing Machine Won’t Drain
  1. Perform a Master Reset. Unplug your washer for about one minute. …
  2. Test the Lid Switch Assembly. …
  3. See if the Drain Hose is Kinked. …
  4. Check the Drain Hose or Pump for Clogs. …
  5. Clean out the Coin Trap. …
  6. Check the Water Level Control. …
  7. Schedule Washing Machine Repair.

What does h2 mean on washing machine?

The meaning of the HE2 error in Samsung washing machines

The HE2 code is deciphered as slow heating of the water in the tank, no more than 20 ° C for 10 minutes. In this case, the electronic module receives information from the temperature sensor.

What does 2H mean on LG washer?

2H – Estimated Time

A 2H is only an indicator of the estimated time remaining for the cycle. 2H means the estimated time remaining is less than 2 HOURS, when the time is less than 99 minutes, is starts counting down untill the washing cycle is over.. This is NOT an error code and does Not require a repair service.

What does UC mean in Samsung washing machine?

Samsung Washing Machine Error Codes
Error Code Cause
UC Excessuve Fluctuation In The Supply Voltage (voltage has fluctuated outside 176-286vAC)
UE, E4 Unbalanced Error (the washing load in the drum is unbalanced i.e. clothes may have got trapped inside a large towel and resting on one side of the drum)
•
Jul 4, 2016

What does he2 mean on dryer?

What does this mean? This means that a heater error has occurred. Please power cycle the washer dryer by switching it off at the power point for five minutes.

What does hc2 mean on Samsung dryer?

It means the dryer heater is not functioning call Samsung here is where I found out.

How long does Sud error last?

If you have noticed a SUD code during a washing cycle, it means the suds have exceeded the drum’s usual level. More specifically, this error means that the washing machine is reducing foaming. It has just stopped for 5-10 minutes to allow the suds to dissipate and the washing cycle to go on.

How do you reset a Samsung washer?

Resetting your washing machine is a simple procedure. Unplug it (or turn off the power at the circuit breaker), wait a short period of time for the electrical charge to dissipate from the washer (typically 1 to 5 minutes at the most), and then plug it back into the wall. That’s all there is to it.

What is UC on Samsung?

It means 5g Ultra capacity which means it’s a faster version of 5g.